9 Heating times (times)
10 a Menu button
10 b OK button
10 c Toggle button between heating temperature / ener-
gy-save temperatur
11 Fixation
12 Highest setting on radiator
13 Thermostat head
14 Notch
15 Adapters
16 Plunger extension
7� Before Starting Up
Before you can start to use the device, you must
remove the plastic tag out of the battery compart-
ment (2).
1� Remove the cover of the battery compart-
ment (2).
2� Pull the plastic tag out of the battery compart-
ment (2).
3� Replace the cover of the battery compart-
ment (2).
4� Set the date and time (refer to Section Setting
the Date and Time on Page 81).
Wait a moment while the device prepares itself for
installation. As soon as the device is ready for in-
stallation
appears in the display (3).
To Next Page
Loading...
