Silvercrest 354199 2010 - Set the Offset; Setting the Window Open Function

82
Gi
Set the Oset
If the current temperature in the room deviates from
the set temperature, the temperature measured by
the device can be adjusted.
Example: If a temperature of 18 °C, for example, is
measured in a room instead of the 20 °C set, you
must dene an oset of -2,0 °C.
1� Press the Menu button (10 a) and keep it
pressed until the menu appears.
2� Select the menu option
. Press the OK but-
ton (10 b) to conrm your selection.
ashes
in the display.
3� Set adaptation of the temperature (from
-5.5 °C to +5.5 °C). Press the OK
button (10 b) to conrm your input.
The temperature indicated in the display does not
change as a result of the adaptation.
Setting the Window Open Function
When the temperature in the room drops suddenly,
the device detects that the room is being ventilated.
To save heating costs, the regulated temperature is
lowered for the set period of time. The window
open icon
appears in the display (3).
1� Press the Menu button (10 a) and keep it
pressed until the menu appears.
2� Select the menu option
. Press the OK but-
ton (10 b) to conrm your selection.
3� Set the required temperature. Press the OK
button (10 b) to conrm your input.