Silvercrest 354199 2010 - Setting the Child Safety Lock (Button Lock); Setting the Frost Protection Function;Heating Pause

84
Gi
3� appears in the display (3). Press the OK
button (10 b) to conrm the input.
The device is reset to its default condition on leav-
ing the factory.
Setting the Child Safety Lock (Button
Lock)
Activate the child safety lock to lock the buttons on
the device.
1� Press and hold the Time (10 c) +
Menu (10 a) buttons simultaneously
for 2 seconds.
The icon appears and the child safety lock is
activated.
Deactivate the child safety lock when you want to
use the device again.
1� Press and hold the Time (10 c) +
Menu (10 a) buttons simultaneously for
2 seconds�
The
icon disappears and the child safety lock is
deactivated.
Setting the Frost Protection Function/
Heating Pause
This function is automatically active.
The frost protection function prevents the room
temperature dropping below freezing point. If the
temperature drops to 0 °C, the device opens the
radiator valve until the temperature increases again
to over 5 °C.