What to do if Silvercrest 360597 2010 does not start?
If your Silvercrest Bread Maker doesn't start, first, ensure the operating light is on to verify the appliance is working. Then, check if the mains plug is properly connected to the wall socket. Also, be aware that some program phases, like 'Preheat' or 'Rise,' may not show kneading blade rotation. Refer to the 'Programme sequence' table to identify the current phase.
What happens if Silvercrest 360597 2010 Bread Maker loses power during baking?
If your Silvercrest Bread Maker loses power during operation for less than 10 minutes, it will automatically restart the last program.
Why does my Silvercrest 360597 2010 Bread Maker display 'H:HH'?
If your Silvercrest Bread Maker displays 'H:HH' after starting, it means the appliance hasn't cooled down enough from the last use. Stop the program, switch off the appliance, open the lid, and let it cool for about 20 minutes before restarting.
How to prevent Silvercrest Bread Maker from crushing fruits and nuts?
To prevent your Silvercrest Bread Maker from crushing fruits or nuts, add these ingredients only when you hear several beeps and see 'ADD' on the display.
What to do if kneading blades of Silvercrest 360597 2010 Bread Maker do not turn?
If the motor of your Silvercrest Bread Maker runs but the kneading blades don't turn, check that the kneading blades and the baking tin are correctly clicked into place.
Why can't I start a new program on my Silvercrest 360597 2010 Bread Maker?
If your Silvercrest Bread Maker won't start a new program and the display reverts to program 1, the appliance may still be too hot from previous use. Turn it off, open the lid, and allow it to cool down for about 20 minutes before trying again.
What to do if Silvercrest 360597 2010 displays 'E:E0'?
If your Silvercrest Bread Maker displays 'E:E0', switch it off and unplug it. Plug it back in and switch it on again. If the error persists, no answer.
How to prevent Silvercrest 360597 2010 from crushing added ingredients?
To prevent the Silvercrest Bread Maker from crushing fruits or nuts, add these ingredients only when you hear several beeps and see "ADD" on the display.
What to do if Silvercrest 360597 2010 kneading blades do not turn?
If the Silvercrest Bread Maker motor runs but the kneading blades do not turn, check that the kneading blades and the baking tin have clicked correctly into place.
Why does my Silvercrest 360597 2010 Bread Maker display "H:HH"?
If the Silvercrest Bread Maker displays "H:HH" after starting a program, it means the appliance hasn't cooled down enough from the last baking. Stop the program, switch off the appliance, open the lid, and let it cool for about 20 minutes before using it again.
General| Power | 850 W |
|---|---|
| Capacity | 750-1000 g |
| Programs | 12 |
| Keep warm function | Yes |
| Timer | 13-hour delay timer |
To Next Page