EasyManua.ls Logo

Silvercrest KH 1172 - User Manual

Silvercrest KH 1172
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Bread Maker
Operating instructions
6
KH 1172
Bread Maker
KOMPERNASS GMBH · BURGSTRASSE 21 · D-44867 BOCHUM
www.kompernass.com
ID-Nr.: KH1172-03/09-V2
CV_KH1172_E4980_LB6.qxd 22.04.2009 15:34 Uhr Seite 1

Questions and Answers

  • J
    Julian PerryAug 16, 2025
    What to do if a kneading hook is stuck in the bread in Silvercrest KH 1172?
    • M
      Mrs. Brianna DennisAug 16, 2025
      Remove the kneading hook with the kneading hook remover.
  • A
    Adrian RobertsonAug 18, 2025
    What to do if smoke comes from my Silvercrest KH 1172?
    • P
      Paul BradleyAug 19, 2025
      If you see smoke coming from the baking space or ventilation slots of your Silvercrest Bread Maker, it's likely due to food residues. Immediately unplug the bread maker and let it cool down. Then, remove the baking mould and clean both its exterior and the baking space thoroughly.
  • J
    Jasmine CarsonAug 22, 2025
    What happens if there's a power failure when my Silvercrest KH 1172 is running?
    • M
      Matthew SmithAug 22, 2025
      If your Silvercrest Bread Maker experiences a power failure lasting 10 minutes or less during a program, it will continue the last programmed procedure to the end.
  • S
    Sarah NelsonAug 25, 2025
    Why are the ingredients not correctly mixed in my Silvercrest KH 1172 Bread Maker?
    • K
      Kaitlin CummingsAug 25, 2025
      If the ingredients in your Silvercrest Bread Maker are not mixing properly or the bread isn't baking through, it could be due to several reasons: * A wrong program selected. * The Stop/Start button was pressed during operation. * An extended power failure occurred during baking. * The appliance lid was opened multiple times during baking. * The kneading hook is blocked. In any of these cases, remove the ingredients (do not reuse them), take out the baking mould, and check if the drive shaft turns. If it doesn't, contact customer service.
  • A
    Amanda BushAug 27, 2025
    How to fix 'H:HH' error on Silvercrest KH 1172?
    • H
      Holly CarlsonAug 27, 2025
      If the display of your Silvercrest Bread Maker shows 'H:HH' and the appliance won't start, it's likely still too hot from the previous baking process. Press and hold the Stop/Start button until the default settings appear on the display. Then, let the appliance cool down with the lid open for about 20 minutes.
  • J
    John HeathAug 31, 2025
    How to remove kneading hook stuck in Silvercrest Bread Maker after baking?
    • S
      Selena RogersAug 31, 2025
      If the kneading hook is stuck in the baking mould of your Silvercrest Bread Maker after baking, fill the baking mould with hot water and twist the kneading hook to loosen any encrustation underneath.
  • E
    Erica GarciaSep 2, 2025
    What to do if smoke comes from the Silvercrest KH 1172 Bread Maker?
    • H
      Heather DavisSep 2, 2025
      If you notice smoke coming from the baking space or ventilation slots, immediately remove the power plug and let the bread maker cool down. After it cools, remove the baking mould and clean both the exterior of the mould and the baking space. The smoke was probably caused by food residues.
  • M
    Maureen HallSep 5, 2025
    Why is my Silvercrest KH 1172 not mixing ingredients properly?
    • L
      lisa33Sep 5, 2025
      If the ingredients aren't correctly mixed or the bread isn't baking properly, it could be due to several reasons: * A wrong program selected. * The Stop/Start button was pressed during operation. * An extended power failure occurred during baking. * The appliance lid was opened multiple times during baking. * The kneading hook is blocked. In any of these cases, remove the ingredients and do not reuse them.
  • C
    Christina FergusonSep 9, 2025
    What to do if kneading hook is stuck in bread from Silvercrest KH 1172?
    • N
      Nicholas MolinaSep 9, 2025
      If a kneading hook is stuck in the bread, remove it using the kneading hook remover.
  • S
    sara70Sep 12, 2025
    Why Silvercrest Bread Maker motor is running but dough isn't stirring?
    • M
      Michael AlexanderSep 12, 2025
      If the motor is running but the dough isn't stirring, check to ensure that the kneading hook and the baking mould are correctly engaged.

Summary

Safety Instructions

Risk of Fire

Precautions to prevent fire hazards, including ventilation and avoiding flammable materials.

Risk of Electric Shock

Guidelines to prevent electric shock, including cable checks and avoiding liquids.

Potential Appliance Damage Warnings

Potential Appliance Damage

Cautionary advice to prevent damage to the appliance during use and maintenance.

Risk of Personal Injury

Warnings to prevent personal injury, especially concerning hot surfaces and proper handling.

Appliance Overview

Hot Surfaces Warning

Symbol indicating hot surfaces on the bread baking machine.

Control Panel Overview

Getting Started

Before First Use

Instructions for initial setup, cleaning, and pre-heating the appliance.

Operational Functions

Error Messages and Troubleshooting

Error Messages

Common error codes and how to resolve them.

Troubleshooting Guide

Answers to frequently asked questions and solutions to common problems.

End of Cycle Operations

End of Programme Warnings

Safety warnings and notes for handling the bread after baking.

Cleaning and Care

General Cleaning Precautions

Important warnings and guidelines for safe cleaning of the appliance.

Warranty and Importer Information

Warranty and Service Details

Information about the product warranty and how to contact service.

Silvercrest KH 1172 Specifications

General IconGeneral
BrandSilvercrest
ModelKH 1172
CategoryBread Maker
LanguageEnglish

Related product manuals