- 15 -
What do I do if the kneading hook q is stuck in the
baking mould
4 after baking?
• Fill the baking form 4 with hot water and twist the
kneading hook
q to loosen the encrustation underneath.
What happens if the finished bread is left inside the
bread maker?
• Through the „Keep-warm function“ it is ensured that the
bread is kept warm for approx. 1 hour and is also pro-
tected against moisture. If the bread remains in the
baking machine for longer than 1 hour, it may become
moist.
Is the baking mould 4 suitable for a dish washing
machine?
• No. Please rinse the baking mould 4 and the kneading
hook
q by hand.
Why doesn't the dough get stirred, even if the motor is
running?
• Check to see if the kneading hook q and the baking
mould
4 have correctly engaged.
What do I do if a kneading hook q is stuck in the
bread?
• Remove the kneading hook q with the kneading
hook remover
e.
What happens if there is a power failure when a
Programme is running?
• With power failures of up to 10 minutes or less, the
Bread Baking Machine continues to the end the last
procedure programmed into it .
How long does it take to bake bread? • Please take note of the exact times given in the table
"Programme time periods".
What bread sizes can I bake? • You can bake the following bread sizes with the baking
mould
4: - Breads with a weight of 700 g:
- Breads with a weight of 900 g
Why can fresh milk not be used with time-delayed
baking?
• Fresh products such as milk or eggs spoil if they
remain in the appliance for too long.
The appliance crushes the added raisins. • To avoid the crushing of ingredients such as fruit or
nuts, add them to the dough after the signal has sounded.
Troubleshooting the Bread Baking Machine
To Next Page
Loading...
