SilverCrest SBB 850 E1
- 1 - English 052021-1 V1.0
Quick Start Guide
This information sheet is a constituent part of the user manual. Always keep it with the user manual. If you
pass the product on to someone else, make sure to give them all the relevant documents with it. Read the
user manual before using the product and pay special attention to the safety instructions contained in it.
Quick start
1. Remove the baking tin (8) from the automatic bread maker by lifting it upwards.
2.
Insert the dough hooks (7) into the drive shafts and make sure that they are tight.
3.
Add the ingredients to the baking tin (8). Start with liquids, sugar and salt. Then add flour, and
finally yeast.
4.
Re-insert the baking tin (8) and make sure that it snaps into place securely.
5.
Close the cover (2).
6.
Insert the mains plug into a mains socket and switch on the main switch. A beep sounds and the
display indicates programme number 1 and the time period for this programme.
7.
Press the programme button to select the desired programme.
8.
Press the button to select the browning level.
9.
Press the button to select the bread weight.
10.
You can use the two timer buttons to set the end time of the selected programme.
Control panel
Display
Bread weight: press the button repeatedly until the arrow is below the
desired weight.
Browning level / Quick mode: setting browning level (light, medium, dark) or
quick mode. Press the button repeatedly until the arrow is on the desired symbol.
Depending on the selected setting, the baking time changes.
Start/Stop button: press this button until a beep sounds to start/stop the device
or to delete a timer setting.
Power LED: indicates that a programme is running
Timer buttons: time-delayed baking
Programme button: select the desired baking programme here. The
programme number and baking time are indicated on the display.
To Next Page
Need help?
General
