How to prevent Silvercrest Bread Maker from crushing raisins?
To prevent the Silvercrest Bread Maker from crushing ingredients like fruit or nuts, add them to the dough after the signal tone sounds.
What to do if there is a power failure when my Silvercrest SBB 850 B2 Bread Maker is running?
In the event of a power failure lasting up to 10 minutes while your Silvercrest Bread Maker is running, the appliance will automatically complete the last set program.
Why Silvercrest SBB 850 B2 Bread Maker does not start after pressing the Start/Stop button?
If your Silvercrest Bread Maker doesn't start after pressing the Start/Stop button: 1. Refer to the "Programme sequence" table to identify the current program section, as some processes like "Warming up“ or "Resting" can be subtle. 2. Ensure the operation lamp is lit, indicating the appliance is functioning. 3. Verify that you've pressed the Start/Stop button correctly. 4. Confirm that the power plug is securely connected to the power grid.
What happens if finished bread is left inside the Silvercrest SBB 850 B2?
The "Keep warm function" maintains the bread's warmth for approximately 1 hour and protects against moisture. Leaving the bread in the Silvercrest bread maker longer than 1 hour may cause it to become moist.
Why can't I use the timer function for baking with fresh milk in my Silvercrest SBB 850 B2?
Fresh products like milk or eggs can spoil if left in the Silvercrest Bread Maker for an extended period. Therefore, the timer function cannot be used for baking with fresh milk.
How to remove kneading blade stuck in Silvercrest Bread Maker bread?
If the kneading blades are stuck in the bread, remove them using the kneading blade remover.
How to remove stuck kneading blades from Silvercrest Bread Maker?
If the kneading blades are stuck in the baking mould of your Silvercrest Bread Maker after baking, fill the baking mould with hot water and twist the kneading blades to loosen any incrustation underneath.
What to do if dough doesn't get stirred in Silvercrest SBB 850 B2 Bread Maker?
If the dough isn't being stirred in your Silvercrest Bread Maker, even though the motor is running, check that the kneading blades and the baking mould are correctly engaged.
Unpack and remove all packaging materials, stickers, and films.
Wipe the bread maker and accessories with a clean, moist cloth.
Heat the empty bread maker for 5 minutes to remove manufacturing residues.
Retains programme progress after a short power failure.
Allows monitoring of the baking process visually.
Select desired baking programme from 1 to 12.
Considerations for successful baking, including safety notes.
Steps to prepare the bread maker and ingredients for baking.
Instructions for cleaning the exterior and interior of the bread maker.
Care instructions for the baking mould, kneading blades, and other parts.
General| Brand | Silvercrest |
|---|---|
| Model | SBB 850 B2 |
| Category | Bread Maker |
| Language | English |
To Next Page