■ 20
│
GB
│
IE
SLE 200 B2
Troubleshooting
The following table will help you to identify and rectify minor malfunctions.
If the solutions below do not resolve the problem, please contact Customer
Service (see section Service).
Fault Possible cause Remedy
The appliance
will not switch
on.
The plug w is not plugged in.
Insert the plug w into the mains
power socket.
The mains power socket is not
supplying power.
Check the house mains fuse.
Safety stop due to missing or
incorrectly inserted water tank 4
Insert the water tank 4 correctly.
The water tank 4 is full.
Empty the water tank 4 and reinsert it.
The appliance
stops occasion-
ally (the fan
switches off).
The automatic defrosting function
is activated.
This is a normal feature of the
appliance.
The humidity of the room has
reached the desired level.
This is a normal feature of the
appliance.
The appliance
is producing
no or too little
condensate.
The air inlet (air inlet grille 2)
or air outlet 8 openings are
contaminated or blocked.
Ensure that the air inlet (air inlet
grille 2) and air outlet 8 openings
are clean and free of obstructions.
The room's windows and doors
are open.
Close the windows and doors.
The air ejected
is warm.
Heat exchange process
This is a normal feature of the
appliance.
The error code
E 1 flashes on
the display p
Temperature sensor error/humidity
sensor error
Contact the Customer Service
department (see section Service).
To Next Page
Loading...
