GB│IE │ 7 ■
SED 400 A1
Preparations
Unpacking
Ƈ Remove all parts of the appliance and the operating instructions from the box.
Ƈ Remove all packaging materials and any adhesive labels from the appliance.
WARNING
Risk of suffocation!
► Do not allow children to play with packaging materials.
Risk of suffocation.
Initial operation
Before starting to use the appliance, ensure that…
– the appliance, power plug and mains cable are in perfect condition
and…
– all packaging materials have been removed from the appliance.
1) Clean all parts of the appliance as described in the section entitled "Cleaning
and care".
2) Unwind the mains cable
from around the cable retainer and guide it
through the recess on the edge.
3) Insert the plug into a suitable mains power socket.
The appliance is now ready for use.
Cable retainer
There is a cable retainer on the base of the appliance. This retainer allows
you to adjust the length of the cable to your requirements.
CAUTION – PROPERTY DAMAGE!
► Ensure that you always guide the mains cable
through the correspond-
ing gap in the rear of the appliance base for the sake of stability.
NOTE
► Always wrap the power cable
around the cable retainer in a clock-
wise direction. This reduces the length of the cable to a minimum, allowing
you to guide the mains cable
through the gap in the appliance base
.
To Next Page
Loading...
