Silvercrest 56861 - Set the Time

16 GB
Before you start
retighten the two screws firmly.
Note: Make sure that you replace the battery compart-
ment cover
21
the right way round. The rounded corners
of the battery compartment cover
21
must fit into the
rounded recesses in the battery compartment.
j The wattmeter is now ready for operation.
Q
Set the time
The time is displayed as soon as the isolating strip has been
removed. The symbol
15
also appears.
j Press the “PRICE” button
3
until the time appears in the
bottom third of the LC display
1
.
j Press the “SET” button
2
for approx. 3 seconds. The
time display flashes.
j Press the “UP” button
5
to set the hours.
j Press the “DOWN” button
4
to set the minutes.
j Press the “SET” button
2
to switch between 12 and
24-hour format.
j Press the “PRICE” button
3
to confirm your setting.
56861_Energiekostenmessgeraet_Content_GB-HU-SI-DE.indd 16 30.11.10 14:12