Silvercrest 56861 - Measure Power Consumption

19 GB
Operation
Q
Measure power consumption
j Press the “UP” button
5
until the Watt symbol
8
appears in the top third of the LC display
1
.
j The LCD
1
now indicates the present power consumption
in W (Watt) required for use of the electrical appliance.
Note: the power consumption is calculated according
to the following formula: power = voltage x current x
power factor.
Q
Maximum power consumption
j Press the “UP” button
5
until the Max symbol
20
and the Watt symbol
8
appear in the top third of the
LC display
1
.
j The LCD
1
now indicates the maximum power consump-
tion in W (Watt) measured by the wattmeter so far.
Note: you can also call up the maximum power consump-
tion reading when the wattmeter has been removed from
the outlet or when the electrical appliance you are testing
is no longer connected to the wattmeter.
Note: the maximum power consumption is saved until
a higher value is measured. The old value is then over-
written by the new measurement.
56861_Energiekostenmessgeraet_Content_GB-HU-SI-DE.indd 19 30.11.10 14:12