25 GB
Operation
16. Press the “SET” button
2
to move to the next digit.
17. Press the “UP”
5
or “DOWN” button
4
to set the
hundreds digit of the current price per kWh in Eurocent (€)
for electricity rate 2. Example: 1.100
18. Press the “SET” button
2
to move to the next digit.
19. Repeat step 17 to set the tens and units digit.
Example: 1.111
20. Press the “SET” button
2
. The time display in the bottom
third of the LC display
1
starts to flash.
21. Press the “UP” button
5
to set the starting time for
electricity rate 2 in hours.
22. Press the “DOWN” button
4
to set the starting time for
electricity rate 2 in minutes.
23. Press the “PRICE” button
3
to confirm your entry. The
power cost meter begins measuring the cost of energy
consumed in electricity rate 2 at the set starting time.
Note: These settings affect the “Display energy costs” function.
Q
Set electricity flat-rate
If your electricity provider does not offer different electricity
rates (day / night), you can set a flat rate for electricity. The
56861_Energiekostenmessgeraet_Content_GB-HU-SI-DE.indd 25 30.11.10 14:12
To Next Page
Loading...