Silvercrest 56861 - Connecting the Electrical Appliance to be Tested

17 GB
Operation
Q
Operation
Q
Connecting the electrical
appliance to be tested
c CAUTION! RISK OF FATAL INJURY BY ELECTRIC
SHOCK! Only measure voltages of over 25 V
~
in compli-
ance with the relevant safety instructions for the electrical
appliance you wish to test.
m CAUTION! RISK OF INJURY! Never exceed the
stated maximum input voltage.
j Plug the wattmeter into a suitable outlet.
j Now plug the mains plug of the electrical appliance you
wish to test into the socket
6
of the wattmeter.
Q
Current measurement
j Press the “UP” button
5
until the Ampere symbol
9
appears in the top third of the LC display
1
.
Note: the “Current measurement” function is the stand-
ard setting for the wattmeter. As soon as the isolating
strip between the two round cell batteries is removed,
the wattmeter is automatically in this mode.
56861_Energiekostenmessgeraet_Content_GB-HU-SI-DE.indd 17 30.11.10 14:12