29 GB
Operation
Note: as soon as the wattmeter indicates that the current
is too weak (0.00 A in “Measure current” mode), the time
measurement function stops.
Note: the time measurement function stops as soon as you
unplug the electrical appliance you are testing from the
socket
6
of the wattmeter. As soon as you plug another
electrical appliance into the wattmeter, the time measurement
function resumes.
Q
Show energy costs
Note: the total cost of the consumed energy is shown in € (Euro).
Note: the total cost of the consumed energy is calculated
on the basis of the set price per kWh (See “Set electricity
rate 1 and 2”, “Set electricity flat-rate”).
Note: Check that standard displays (see “Measuring the
current“ and “Measuring the mains voltage“) appear in the
top and middle thirds of the LC display
1
.
j Press the “PRICE” button
3
until the cost symbol
13
(“TOTAL €”) appears in the bottom third of the LC
display
1
.
j The LCD
1
now indicates the energy costs incurred for
use of the electrical appliance.
56861_Energiekostenmessgeraet_Content_GB-HU-SI-DE.indd 29 30.11.10 14:12
To Next Page
Loading...