Silvercrest Classic Model L - Page 13

17 GB
Union nut:
Screw the union nut anti-clockwise
13
. Then
you can remove the thermostat head
11
.
Snap-on fastenings:
You can easily release thermostat heads
fastened in this way by turning the clo-
sure fastening/union nut a small amount
in an anticlockwise direction
12
. Then you
can remove the thermostat head
11
.
Clamping screw connections:
The thermostat head is held by means of
a fastening ring, which is held together by
a screw. Release this screw and remove
the thermostat head from the valve
11
.
Screw connection with setscrews:
Release the setscrew and remove the
thermostat head
11
.
91033_silv_Heizkoerperthermostat_Content_DK.indd 17 09.07.13 11:07