Silvercrest Classic Model L - Setting the Offset Temperature

38 GB
To activate this function proceed as follows:
Press the Menu key
7
longer than
3 seconds.
Select the „AER“ menu item with the
selector dial
6
and confirm with the OK
key
5
.
The temperature and time can be set with
the selector dial. The function can be de-
activated by selecting „0“ for the time.
Setting the offset
temperature
Since the temperature is measured at the radi-
ator, it can be colder or warmer at another
location in the room. In order to equalise this,
a temperature offset of +/- 3.5 °C can be set.
If for example 18 °C is measured instead of
the set 20 °C, then an offset of -2.0 °C is to
be set.
91033_silv_Heizkoerperthermostat_Content_DK.indd 38 09.07.13 11:07