21 GB
Note: If the retaining ring can not be fit-
ted, the stability is already sufficient and
the ring is not required for the installation.
Adapting run
After the batteries have been inserted, the
motor first travels back, during which „INS“
and the activity symbol
are displayed. As
soon as „INS“ without the activity symbol
is displayed, the programmable radiator
control unit can be installed. An adapting run
(„AdA“) is performed after installation to
adapt to the valve.
Place the programmable radiator control
unit on the valve.
Tighten the union nut firmly.
Press the BOOST key
5
, when „INS“ is
shown in the display.
91033_silv_Heizkoerperthermostat_Content_DK.indd 21 09.07.13 11:07
To Next Page
Loading...