20 GB
Latch the adapter, which corresponds to
the valve, completely onto the valve body.
The RAVL adapter does not have to be screwed
on (see fig. E).
Note: When installing, please ensure that the
spigots inside the adapter
14
are in the same
position as the indentations
13
on the valve.
Latch the adapter, which corresponds to
the valve, completely onto the valve body.
Retaining ring
The valves of a number of suppliers can ex-
hibit tolerance variations, which may lead to
the programmable radiator control unit being
seated too loosely on the valve. The stability
and seating on the valve can be improved by
using the enclosed retaining ring (see fig. F).
Place the retaining ring
16
in the flange
or on the valve connection of the radiator
and screw the thermostat valve on.
91033_silv_Heizkoerperthermostat_Content_DK.indd 20 09.07.13 11:07
To Next Page
Loading...