39 GB
To set the offset temperature proceed as
follows:
Press the Menu key
7
longer than
3 seconds.
Select the „TOF“ menu item with the se-
lector dial
6
and confirm with the OK
key
5
.
Turn the selector dial for as long as
necessary until the desired temperature
appears.
Confirm with the OK key.
Restoring the factory
settings
The status of the programmable radiator con-
trol unit can be manually restored by means
of a reset to that when originally supplied.
This means that all the manually performed
settings are lost.
91033_silv_Heizkoerperthermostat_Content_DK.indd 39 09.07.13 11:07
To Next Page
Loading...