22 GB
The intelligent radiator control unit carries out
a test run.
During this time „AdA“ and the activity sym-
bol
are shown in the display and operation
is not possible.
Note: If the adapting run is initiated before
installation, the motor similarly travels back to
the „INS“ position. If an error message (F1,
F2, F3) is displayed, press OK and the motor
travels back to the „INS“ position.
Start-up
Setting the weekly program
Up to 3 heating phases (7 switching time points
)
can be set separately for each weekday in
the weekly program. The programming is done
for the selected days and temperatures must be
stored for a time period from 00:00 to 23:59.
91033_silv_Heizkoerperthermostat_Content_DK.indd 22 09.07.13 11:07
To Next Page
Loading...