25 GB
Finally set the temperature which should
prevail from 6:00.
You can repeat this procedure until all the
other desired temperatures for the time
period from 0:00 to 23:59 have been
stored. If all 7 switching time points have
been allocated, 23:59 is displayed as
the final switching point to be confirmed.
The temperature can also be changed in
Auto mode at any time via the selector dial.
The changed temperature is then retained
until the next switching time point.
Weekly program: examples
Up to 3 heating times (7 switching time points)
with individual temperature setting can be
stored for each weekday with the program-
mable radiator control unit.
91033_silv_Heizkoerperthermostat_Content_DK.indd 25 09.07.13 11:07
To Next Page
Loading...