CRB-631 - Basic functions
24
Default settings:
If the selection button (SEL) (15) is pressed for longer than 2 seconds, the default
settings menu is opened in the following sequence:
INVOL → ADJ → TAVOL → EON → REC → TELVOL → DSP → LOUD → LOC →
STEREO → EXIT
As soon as one of these items is selected, the setting can be modified by pressing the
plus (+) or minus (-) buttons (9).
Explanation of the functions:
INVOL (start-up volume)
Change the default start-up volume at which the device is switched on.
ADJ (clock)
Increase the hours (plus (+) button) or the minutes (minus (-) (9) button) of the clock
time.
TAVOL (volume of the traffic announcements)
Change the volume of the traffic announcements.
EON
Switch the function EON ON or OFF (the standard setting is ON).
REC (format for recording)
Select either the MP3 or WMA format for recording.
TELVOL (telephone volume) selected
Select the start-up volume of a call. The default setting is 25.
We recommend selecting a volume of below 35 for the best sound quality.
DSP (DIGITAL SOUND PROCESSOR)
Select one of the preset sound settings of the equaliser:
NONE → CLASSIC → ROCK → POP → FLAT → NONE
LOUD (permanent bass and treble boost)
Switch the function LOUD ON or OFF (the standard setting is OFF).
LOC
Switch the function LOC ON or OFF.
ON is selected for reception of a local station and OFF for the reception of more
distant stations.
STEREO
Select either MONO or STEREO for playback.
Note:
If no entries are made for 5 seconds, the display returns to the default setting in
the selected mode.
To Next Page
Loading...
