lish
Record mode
TUNER
CD
AUX
USB
SD
SD
USB
Delete
Note:
If no entries are made for 5 seconds, the display returns to the default setting in
the selected mode.
Start/stop recording
When you have selected the required recording mode, start recording by pressing the
Band button (24). Recording is indicated on the display by a flashing "R". The symbol
of the medium used for recording flashes (USB/M.Card).
Press the Band button (24) to stop recording. When recording is finished, the device
resumes playing from the selected data source.
Important!! Note on copy protection:
Always comply with the valid legal regulations for making copies of copyright-
protected media. In case of doubt contact a local expert.
Delete track (from the card/USB stick)
You can also delete tracks during playback from a USB or SD source.
To do this, select the track you wish to delete and press the (0/DISP) (22) button for at
least 2 seconds to activate the DELETE function.
Press the Band button (24) to delete the selected track.
To Next Page
Loading...
