18 GB/IE
Automatic radio station search
(AMS function)
Note: Using the AMS function, the device automatically searches
for radio stations and saves these on the 10 presets of the respective
frequency band.
Note: Note that while the AMS function is working, all previously
saved radio stations are lost.
Press the M+ / AMS button
7
for approx. 2 seconds. The device
begins the radio station search and fills the presets
up to
with the radio stations it has found. The preset flashes briefly on the
display
1
as each radio station is saved. The search stops when
all preset spaces have been filled or when the radio station has
been found.
Select saved radio stations
To select the presets to , press the M+ / AMS button
7
repeatedly.
Programme the alarm time
and the alarm type
Note: You can choose when programming the alarm times whether
you would like an alarm tone to ring or if the radio should switch on
when the alarm goes off. You can programme two different alarm times
(Alarm 1 / Alarm 2). Ensure that the radio has been switched off.
To Next Page
Loading...
Need help?
General
