EasyManua.ls Logo

Silvercrest HG00708A - Deactivate the alarm function; Snooze function; Automatic switch off (SLEEP function)

Silvercrest HG00708A
111 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20 GB/IE
Deactivate the alarm function
Press the DOWN / AL1 button
12
or the UP / AL2 button
13
repeat-
edly until the dot beside the alarm type (
= Alarm, = Radio)
goes away.
Snooze function
To switch off the alarm temporarily, press the SNOOZE / LIGHT /
DIM button
10
while the alarm is ringing. The alarm will be reacti-
vated after approx. 6 mins.
When alarm is temporarily turned off, the LED blinks on the display.
Automatic switch off (SLEEP function)
Note: Using the SLEEP function, the device switches itself off accord-
ing to a time set by you between 60 and 10 minutes.
To switch on the device, press the SLEEP button
8
. On the display
1
a switch-off time of 60 minutes appears. To shorten the switch-off
time by a further 10 minutes, press the SLEEP button
8
again.
Press the SLEEP button
8
repeatedly until the desired switch-off
time is shown on the display
1
. After a few seconds the time will
show up on the display
1
again.
To switch off the SLEEP function, press the SLEEP button
8
repeat-
edly until OFF shows up on the display
1
. Alternatively press the
/ FM / AM button
11
; the device will also switch off.
Note: When sleep function is activated, the frequency band cannot
be changed between AM and FM.

Table of Contents

Related product manuals