19 GB/IE
Press the DOWN / AL1 button
12
or UP / AL2 button
13
. On the
display
1
the time will flash and a dot will appear in the left or
right corner beside the type of “alarm“ (
).
To set the hour, press or hold the VOL - / HR -button
5
.
To set the minutes, press or hold the VOL + / MIN -button
6
.
Press the DOWN / AL1 button
12
or UP / AL2 button
13
to set the
“radio“ (
) as the alarm. On the display
1
a dot appears in the
left or right corner beside the alarm „radio“ (
). The time and the
dot are now blinking.
To apply a setting, wait until the time and the dot beside the alarm
type stop flashing.
Note: If you would prefer the „radio“ to be your alarm, the last
programmed radio station and volume will be broadcast.
Activate the alarm function
To activate the alarm function, press the DOWN / AL1 button
12
or
UP / AL2 button
13
briefly one or more times. A dot appears on the
display next to the alarm (1 or 2) symbolizing the waking up function
with alarm (
) or with the radio ( ).
Deactivate the alarm
To switch off the alarm for 24 hours, press the / FM / AM button
11
while the alarm is ringing.
Note: The device automatically stops the alarm after an hour if the
alarm has not been switched off manually.
To Next Page
Loading...
Need help?
General
