Silvercrest M SLM 5 A1

SLM 5 A1
GB
│
IE
│
51 ■
♦ Start playback on the Bluetooth
®
device.
♦ Press and hold the
button for about 3 seconds to turn the
speaker off and deactivate the Bluetooth
®
function. You will
hear a descending series of beeps.
The operating/charging LED flashes blue and orange twice
simultaneously and then goes out.
To connect further Bluetooth
®
devices, proceed as follows:
♦ Switch on the speaker and press the
button . Now, the
speaker is in pairing mode and can be connected to another
Bluetooth device.
NOTE
► If you do not establish a connection between the speaker and
your Bluetooth
®
device within 3 minutes, the speaker will
switch off automatically. In this case, you will have to switch the
speaker back on before restarting the pairing process.
► If the speaker stops receiving a signal while in Bluetooth
®
mode, the speaker will switch off automatically after around
10minutes.