Silvercrest RHYTHM GO - Using the Product; Charging; Description of the LED Indicators

13 GB/IE/NI
 Description of the LED indicators
Power
ON/OFF
Status LED color
Power ON Power ON
LED
6
flashes once per sec.
white
Bluetooth
connection
Bluetooth Pairing mode: LED
6
flashes white once per
sec.
Bluetooth Paired: LED
6
flashes white approx. every
5 sec.
TWS
connection
TWS Primary unit: LED
6
flashes approximately every
5 seconds white
TWS Secondary unit: LED
6
soild white
PartyPlay
connection
Primary unit: LED
6
soild
white
Secondary unit:LED
6
breathing white
AUX
connection
LED
6
Solid green
Charging
LED
2
soild red ,Turn off
the red light after charging
completed
Low battery
LED
2
flash red
Power OFF Charging
LED
2
soild red, then red
light turns off after charging
completed
 Establishing a Bluetooth
®
connection:
 Remove all plugs from the AUX-in jack
4
before you
attempt to establish a Bluetooth
®
connection.
 Switch on the playback device and make sures its Bluetooth
®
mode is on.
 On the product press the
button
8
for 2 seconds until the
LED
6
flashes white and a signal tone sequence sounds.
The product will now attempt to connect to the playback
device (e.g. smartphone or computer).