Silvercrest SAK 4000 A1 - Taking Photos; Viewing Videos and Photos

26 GB/IE/NI
Make sure that the product is in video mode. The video mode sym-
bol
27
is shown in the top left of the LCD touch display
5
.
Press the shutter release / select button
2
. The status LED
6
will flash blue. At the top of the LCD touch display
5
, a red
dot will appear with a notice of the current length of the video
to the right.
Press the shutter release / select button
2
again to stop record-
ing. The status LED
6
will light up continuously blue. The notice
“Video time remaining on memory card“
30
will be displayed
in the LCD touch display
5
.
Taking photos
Switch the product on (see chapter “Switching the product on
and off“).
Make sure that the product is in photo mode. The photo symbol
39
is shown in the top left of the LCD touch display
5
.
Press the shutter release / select button
2
once to take a single
picture. The notice “Remaining image storage space on memory
card“
43
will be displayed in the LCD touch display
5
.
Viewing videos and photos
Switch the product on (see chapter “Switching the product on
and off“).
Press the on / off / mode button
1
to navigate the menu.
Press the shutter release / select button
2
to open playback
mode
. Alternatively, you can also open the menu by tapping
on the
-touch button (mode menu)
15
,
32
.