Silvercrest SAK 4000 A1 - Troubleshooting; The Product Does Not Switch On.; The Product Turns Itself Off Automatically.; Videos and Photos Are Blurry.

85 GB/IE/NI
Store the accessories with the camera so you will find all the
necessary parts when using it again.
Regularly recharge the batteries during storage to maintain the
battery capacity.
Troubleshooting
= Problem
= Possible cause
= Solution
= The product does not switch on.
= The rechargeable battery is empty.
= Charge the battery using the USB cable
56
.
= The product turns itself off automatically.
= The rechargeable battery is empty.
= Charge the battery using the USB cable
56
.
= You have selected the function “Automatic shut-off“. Turn the
function off–if desired–or adjust the automatic shut-off (see
chapter “General settings“).
= Videos and photos are blurry.
= The lens
4
or the waterproof case
59
is dirty.
= Clean the product or the waterproof case
59
as described in
the chapter “Cleaning and care“.