Silvercrest SBFL 5 A1 - Operate Bicycle Speaker; Pairing Via Bluetooth; Play Music Via Bluetooth; Controlling the Volume

 - English
. Operate bicycle speaker
` Press and hold the play button () until you hear a tone and the operating LED () lights
up.
The device switches to pairing mode and is ready to connect an external device via Blue-
tooth
®
.
.. Pairing via Bluetooth
®
` Enable the Bluetooth
®
function on your external device and pair the devices. Refer to
the user manual for your audio playback device for more information. The name of the
bicycle speaker is “SBFL  A” (see Fig. I).
Pairing is completed as soon you hear a tone, the operating LED () is permanently blue
and playback starts.
` If you want to stop data transfer via Bluetooth
®
, switch off the Bluetooth
®
function on the
external device.
` Switch off the device by holding down the play button () for about  seconds.
The next time you turn it on, the bicycle speaker will automatically connect to the last
paired device.
. Play music via Bluetooth
®
You can play and control music from your mobile phone via the bicycle speaker.
` Press the play button () to pause music playback.
` Press the play button again to resume music playback.
` Press the > button () to skip to the next track.
` Press the < button () once to skip back to the start of the track that is currently being
played.
` Press the < button () twice to skip to the previous track.
.. Controlling the volume
` Press the + button () to increase the volume.
` Press the  button () to decrease the volume.