English -
. Play back music via AUX port
If you connect the bicycle speaker to an external audio device, playback is controlled only
by the external audio device.
.. Controlling the volume
For better control of the volume, you should set the volume of the external audio device to
the highest level and then use the bicycle speaker itself to control the volume.
` Press the + button () to increase the volume.
` Press the button () to decrease the volume.
. Storage
` When you are not using the device, disconnect the USB charging cable from the pow-
er supply and store the device in a dry, dust-free and frost-free place, away from direct
sunlight.
` If you do not intend to use the device for a prolonged period, charge the device before
and regularly during storage (approx. every to months) to prevent the battery from
becoming fully discharged.
` Observe the environmental conditions for storage specified in the technical specifica-
tions.
. Cleaning the device
` Do not use any solvents or caustic/gaseous cleaning agents to clean the device's sur-
faces and accessories. Wipe the surfaces with a damp cloth.
` Make sure that no liquids penetrate the device.
. Troubleshooting
If the device stops working properly, please refer to the troubleshooting table shown be-
low to see if you can resolve the problem yourself.
Never attempt to repair the device yourself. If a repair is necessary, please contact our
Service Centre or a suitable authorised repair workshop.
Problem Solution
Bicycle speaker does
not work.
` Battery is not sufficiently charged.
` Switch on the device. Connect it to the external device.
Battery is not charging. ` Check the USB connection.
` Is the operating light red or purple? Contact the Service
Department if this is not the case.
To Next Page
Loading...