17 GB/IE/NI
Before use
Before use, verify the package contents are complete and
undamaged!
Charging the battery
The battery must be charged prior to first use.
The LED
4
will flash red and headphones sound acoustic
signal when the battery is drained. The battery should then be
charged as soon as possible.
Plug the micro-USB plug
13
on the charging cable into the
micro-USB charging socket
5
on the headphones! Plug the
USB type A plug
11
on the charging cable into the USB port
on a PC or a USB adapter (not included).
Note: The LED
4
will remain red whilst charging. Once the
battery is fully charged, the LED
4
will remain blue.
Once charging has completed, remove the micro-USB plug
13
from the headphones.
To Next Page
Loading...
