21 GB/IE/NI
The memory in the headphones is cleared. After clearing the
paired memory, it will not automatically connect the device
you used before, need to pair again manually.
Putting on the headphones
The headphones can be adjusted to your head size, if necessary:
the speakers
9
are secured to the band with a rail for this purpose.
Adjust these to ensure optimal comfort.
Please note the marking “L“ (= left) and “R“ (= right) on the inside
of the band immediately above the speakers. Put on the headphones
so the control buttons are on the right.
Headphones button functions
for music playback
Start a playlist on your playback device. First turn the volume of
the playback device to minimum, then put on the headphones.
You can adjust the headphones volume with the control buttons.
Music is played back through the speakers
9
.
There are 5 control buttons. These control the following func-
tions:
To Next Page
Loading...
