Silvercrest SBK 40 A1 - Connecting the Headphones Through AUX Cable

25 GB/IE/NI
– The ringer and the caller‘s voice are rendered through the
speakers
9
.
– Music playback is automatically paused when a call is re-
ceived.
– The microphone
6
records your voice.
– Music continues after the call has been ended.
Note: No headset function while using AUX cable
12
.
Connecting the headphones
through AUX cable
Insert the AUX cable (3.5 mm)
12
into the AUX IN
10
and
other 3.5 mm jack plug in to the 3,5 mm jack connection
socket of your playback device.
Start a playlist on your playback device. You can only adjust
the music volume on the playback device.
Note: Music playback via AUX cable takes priority over music
playback via Bluetooth
®
. Music playback from a Bluetooth
®
source is therefore interrupted once the AUX cable
12
is
plugged into the AUX IN
10
.