Silvercrest SBK 40 A1 - Clearing Paired Devices

20 GB/IE/NI
communication device (mobile phone or computer) is discon-
nected.
Now connect to the second communication device via Blue-
tooth
®
with the headphones. Please refer to the notes in the
instructions for your communication device. Select the entry
“SBK 40 A1“ from the list of devices detected by your com-
puter or mobile. The second communication device is connected.
Briefly press button
8
and acoustic signal sounds. The first
communication device is connected again. Now, both commu-
nication devices are connected to the headphones simultane-
ously.
Clearing paired devices
In paired mode (the LED
4
will briefly flash blue twice every
3 seconds), press and hold
button
8
for 3 seconds and
acoustic signal sounds.
The headphones is now in pairing mode. The LED
4
flashes
red and blue.
Simultaneously pressing and holding button
8
and
button
2
for approx. 2 seconds and two beeps sound.