GB
│
IE
│
13 ■
SBKG 40 A1
♦
To terminate the Bluetooth
®
connection, either disable the
Bluetooth
®
function on the Bluetooth
®
playback device or hold
down the Bluetooth
®
pairing button 8 for about 2 seconds until
the LED 6 flashes blue and white. The headphones are now in pairing
mode again.
♦ Alternatively, switch the headphones off as described above to deacti-
vate the Bluetooth
®
function.
NOTE
►
The next time you turn on the headphones, they will automatically
connect to the last Bluetooth
®
playback device that was connect-
ed. If your Bluetooth
®
playback device does not automatically
reconnect to the headphones, you will have to re-establish the connec-
tion manually. A detailed description of how to do this can be found
in the operating manual for your Bluetooth
®
playback device.
► If no Bluetooth
®
connection can be made within 10 minutes, pairing
mode ends and the headphones switch off automatically.
► If there is an existing Bluetooth
®
connection but no music playback
within 10 minutes, the headphones switch off automatically.
► Ensure that the headphones are no more than 10 metres away from
the Bluetooth
®
playback device. Make sure that there are no barri-
ers or electronic devices placed between them.
► As soon as you connect the AUX IN socket 0 to the audio cable w,
the Bluetooth
®
function is deactivated and the headphones change
to AUX IN mode. The Bluetooth
®
function can only be reactivated
once you remove the audio cable w from the AUX IN socket 0.
To Next Page
Loading...
