Silvercrest SBKG 40 A1 - Bluetooth Connection Management

■ 16
│
GB
│
IE
SBKG 40 A1
Music playback via AUX IN
You can use the supplied audio cable w to connect the headphones to
non- Bluetooth
®
-compatible playback devices. In AUX IN mode, the
headphones behave like normal, cable-connected headphones and can
even be used with an empty battery. The Bluetooth
®
function is deactivat-
ed and the buttons on the headphones do not function.
♦ Make sure that the headphones are switched off.
♦ Connect the audio cable
w to the AUX IN socket 0 of the head-
phones.
♦ Connect the audio cable
w to the audio output (e.g. headphone jack)
on the playback device.
♦ Switch on the playback device and set the volume to minimum.
♦ Put on the headphones as described in the section Wearing the
headphones.
♦ Set the desired volume on the playback device.