Silvercrest SBKG 40 A1 - Call Handling Procedures

GB
│
IE
│
19 ■
SBKG 40 A1
Troubleshooting
Fault causes and remedies
If you cannot connect the headphones to a Bluetooth
®
-compatible play-
back device, proceed as follows:
♦ Make sure that the Bluetooth
®
function is activated on the playback
device.
♦ Make sure that the audio cable
w is connected to the AUX IN socket0
of the headphones. When an audio cable w is connected, the
Bluetooth
®
function of the headphones is deactivated.
♦ Check that the headphones are switched on.
♦ If you use several Bluetooth
®
playback devices, ensure that any
previous connection is disconnected. There may be a previously paired
playback device still within range.
♦ Make sure that the headphones are no more than 10 metres from the
playback device and that no obstacles or electronic devices are placed
between them.
NOTE
►
In an environment with high-frequency interference, you may experi-
ence noise interference during music playback via Bluetooth
®
. As
soon as the interference has ceased, music playback should automati-
cally continue in Bluetooth
®
mode without any further problems.