Silvercrest SBKG 40 A1 - Sound and Power Issues

■ 28
│
US-EN
SBKG 40 A1
► In an environment with high-frequency interference, you
may experience noise interference during music play-
back via Bluetooth
®
. As soon as the interference has
ceased, music playback should automatically continue in
Bluetooth
®
mode without any further problems.
The following table helps identify and solve other potential
problems:
Error Possible cause Solution
The head-
phones
cannot be
turned on.
The internal
battery is not
charged.
Charge the battery (see
section Charging the
battery).
No sound.
The headphones
are not turned
on.
Press the button
4
for
about 2 seconds to turn on
the headphones.
The volume is set
to minimum.
Set the desired volume
using the button 3. If
necessary, you may also
need to increase the volume
on the playback device.
The playback
device is not
turned on.
Turn on the playback
device.
IB_398448_SBKG40A1_LB9.indb 28IB_398448_SBKG40A1_LB9.indb 28 28.10.2021 11:03:3028.10.2021 11:03:30