Silvercrest SBL3 D1 - Troubleshooting

SilverCrest SBL 3 D1
English - 55
10. Troubleshooting
Unable to power the speaker on
• The speaker battery is empty. Recharge the battery.
No Bluetooth
®
connection can be established
• Check if the speaker is switched on and Bluetooth
®
mode is enabled. If
necessary, switch the speaker on and enable the Bluetooth
®
mode.
• Please check whether the Bluetooth
®
function is activated on your
mobile phone or audio device and on the speaker.
• The distance between the devices is too great, move them closer.
• Make sure that any previous pairing to another Bluetooth
®
device has
been unpaired. If necessary, unpair the connection and make a new
pairing with the desired Bluetooth
®
device.
You notice limitations on the functionality between the
speaker and the Bluetooth
®
device used
• This problem could be related to the current software version of your
Bluetooth
®
device. You could try updating the software version. See the
User Manual for your Bluetooth
®
device.
No sound
• Increase the speaker volume.