EasyManua.ls Logo

Silvercrest SBLD 28 A1 - Charging the Speaker

Silvercrest SBLD 28 A1
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SBLD 28 A1
10 
GB
IE
NI
Charging the speaker
CAUTION
Use the device only in dry interior rooms.
Use only the supplied charger cable
to charge the appliance.
Always disconnect the charger cable
when charging is
complete!
Before using the device, the integrated battery must be completely
charged.
Ensure that the On/Off switch
is in the OFF position.
Connect the USB plug on the charger cable
to a PC or to
a USB power supply.
Connect the micro-USB plug of the charging cable
to the
charging socket (POWER INPUT)
on the device.
NOTE
The operating/charging LED
lights up orange during charging.
When the battery is fully charged, the charging LED turns off.
NOTE
Charging takes about 3 hours with a charging current of 500 mA.
When the battery is fully charged, you can play back music
for about 3 hours without lighting, or 1.5 hours with lighting at
a medium volume. The playback time may vary depending on
usage (volume/lighting).
When the battery is dead, you will hear several beeps within a
few seconds and the operating/charging LED
flashes orange.
The device then switches off automatically.

Related product manuals