Silvercrest SBLD 28 A1 - Handling and Use; Switching the Speaker On;Off

SBLD 28 A1
GB
│
IE
│
NI
│
11 ■
Handling and use
This section provides you with important information on handling and
using the device.
Switching the speaker on/off
♦ Set the On/Off switch to the ON position to turn the loud-
speaker on and activate the Bluetooth
®
function. You will hear
a beep and the operating/charging LED
flashes alternately
orange and blue.
♦ Set the On/Off switch
to the OFF position to switch the
loudspeaker off and deactivate the Bluetooth
®
function.
You will hear a beep.
Power saving mode
If there is no input signal to the 3.5 mm jack or no playback via
Bluetooth
®
, the speaker switches automatically into power saving
mode after 10 minutes.
The operating/charging LED
turns off and any existing Bluetooth
®
connection will be terminated.
♦ Set the On/Off switch
to the OFF position and then back to
the ON position to exit power saving mode.