SBLD 28 A1
■ 12
│
GB
│
IE
│
NI
Pairing the speaker with a Bluetooth
®
music device
Before you can use the speaker, you must pair it with a compatible
Bluetooth
®
device.
♦ Ensure that the speaker is switched off and the Bluetooth
®
device is switched on.
♦ Set the Bluetooth
®
device so that it scans for other Bluetooth
®
devices. A detailed description of how to do this can be found in
the operating instructions for your Bluetooth
®
device.
♦ Set the On/Off switch
to the ON position to turn the loud-
speaker on and activate the Bluetooth
®
function. You will hear
a beep and the operating/charging LED
flashes alternately
orange and blue.
♦ Select SBLD 28 A1 from the list of found devices on your
Bluetooth
®
device to pair the two devices. You will hear a
short beep when the connection has been successfully estab-
lished.
The operating/charging LED
flashes blue every 2 seconds to rep-
resent the established Bluetooth
®
connection. You can now use the
speaker to listen to your favourite tunes wirelessly.
NOTE
► The next time you turn on the speaker, it will connect auto-
matically to the last-connected Bluetooth
®
device. If your
Bluetooth
®
does not automatically reconnect, you will have
to re-establish the connection to your Bluetooth® music device
manually. A detailed description of how to do this can be found
in the operating instructions for your Bluetooth
®
device.
► If you want to connect the speaker to another Bluetooth
®
device, you must first uncouple the current Bluetooth
®
device.
To Next Page
Loading...
