To Next Page

To Previous Page

SBTF 10 C2

able for other mobile telephones. To use the hands-free

appliance with a linked mobile phone that is not the last

used mobile phone, the connection must be made via the

Bluetooth

menu of the mobile phone.

Separating the connection

If you wish separate the mobile telephone from the hands-

free appliance, for example, to connect it to another

Bluetooth

appliance:

● Switch the hands-free appliance oﬀ

● separate the connection over the Bluetooth

menu in

the mobile telephone.

You need not erase the coupling with the hands-free appli-

ance in the Bluetooth

menu to separate the connection.

Re-establishing the connection

If you want to reconnect the hands-free appliance with the

last used mobile phone:

● Check to see that Bluetooth

is activated in the mobile

telephone, then switch the hands-free appliance on.

When connecting to a previously coupled mobile telephone

it is not necessary to enter a pass-code. You can set your

mobile telephone so that when the hands-free equipment is

switched on a connection with the mobile telephone is auto-

matically established. As soon as the hands-free equipment

is connected to the previously coupled mobile telephone a

short, high signal tone is emitted conﬁ rming the connection.

Further information regarding automatic coupling can be

found in your mobile telephone’s operating instructions.

Using the hands-free appliance

After successful coupling, the following functions are

available to you. Some of the described functions are

only possible with a mobile telephone that supports the

Handsfree Proﬁ le (HFP).

IB_93813_SBTF10C2_LB7.indb 9IB_93813_SBTF10C2_LB7.indb 9 10.10.13 11:4510.10.13 11:45

Silvercrest SBTF 10 C2 Operating Intructions

Other manuals for Silvercrest SBTF 10 C2