GB
CY
12
SBTF 10 C2
● Ensure that the hands-free appliance is distanced a ma-
ximum of 10 metres from the mobile telephone and that
there are no barriers or electronic devices between them.
Replacing the fuse
The hands-free set is equipped with a fuse. If the device
no longer works, check the fuse and replace if necessary.
● Open the vehicle connector plug 1 by turning the
fl uted screw insert
A
gently anticlockwise – with pliers
if necessary – and remove it.
● Remove the plug tip
B
from the fuse
C
and pull the fuse
out. Ensure that the spring
D
in the vehicle connector
plug 1 does not accidentally jump out and become lost.
● Place a new fuse of type F2AL/250V into the vehicle
connector plug 1, place the plug tip
B
onto the end
of the fuse that is slightly protruding
C
and screw the
screw insert that you removed earlier
A
back in.
Risk of fi re!
● Replace the fuse only with another of the same rating
as that given on the ratings plate. Fuses with a diff erent
rating may cause fi re. Smoke resulting from such a fi re
is poisonous.
Note:
If these measures do not correct the problem, please con-
tact the appropriate service partner for your country.
D
C B A
IB_93813_SBTF10C2_LB7.indb 12IB_93813_SBTF10C2_LB7.indb 12 10.10.13 11:4510.10.13 11:45
To Next Page
Loading...
Need help?
General
