SilverCrest SCW 5 A1
70 - English
Bike holder
You can use the bike holder to mount the water-resistant case on the bike frame or another
tube. To mount the bike holder, proceed as follows:
Open the holder by untightening the screws as far as necessary to be able to remove
the screw located on the side of the clip on the bottom piece.
Rotate the bottom piece aside.
Place the upper piece on a tube and replace the bottom piece.
Reinsert the screw into the bottom piece.
To fix the holder on the tube, tighten the screws.
Next you can fix the camcorder together with its water-resistant case and the swivel
holder on the bike holder. Please see the "Swivel holder" section on page 68.
To Next Page
Loading...
