Silvercrest SDL 300 C2 User Manual

SDL 300 C2
■ 8
│
GB
│
IE
♦ You can repeat this procedure until you have
reached 3000 g in total weight. If 3000 g is
exceeded, the display 2 shows "
".
NOTE
► You cannot use the TARE function while you
are adding weights!
TARE function/measuring in a container
♦ If you want to weigh food in another container,
place the container in the spoon 1 first.
♦ Then press the ON/TARE button 4 to reset the
display to zero.
♦ When you add the food to the container, only
the weight of the food itself will be displayed.
If you take the container with the food off the
spoon 1, a negative value will be displayed.
♦ Now press the ON/TARE button 4 again to
return to the normal weighing mode.
Measuring liquids
The scale in the spoon 1 can be used for measuring
liquids (15–45 ml or 1–3 tablespoons).
However, due to optical displacement, differences
of up to 15% can occur.
Hold function (HOLD)
If you press the HOLD button 6 while a weight is
being displayed, the weight display will be retained
even if you remove the contents from the spoon 1.
If you then press the HOLD button 6 again, you
will deactivate the hold function and the current
weight will be displayed again.
Changing the batteries
As soon as the battery becomes low, the " " symbol
will be shown on the display 2 to remind you to
replace the battery soon. When "
" appears
on the display 2, the battery is empty.
You should then replace the battery:
♦ Remove the cover of the battery compartment 5.
♦ Take out the empty battery, and replace it with
a new 1.5 V AAA/LR03 battery. Ensure that the
battery has the correct polarity.
♦ Close the battery compartment 5.

Silvercrest SDL 300 C2 Specifications

General

Brand	Silvercrest
Model	SDL 300 C2
Category	Scales
Language	English