Silvercrest SDL 300 C2 User Manual

SDL 300 C2 GB
│
IE
│
9 ■
Error messages
- "OUTZero": There is already more than 30 g
weight in the spoon 1 when the scale is switched
on. Remove the weight from the spoon 1 and then
switch the appliance back on again.
- „UNSTable“: The appliance is not being
held stably/level while being switched on. Place the
appliance on a stable support/hold the appliance
level and still in your hand.
– The batteries are low. The batteries will need to
be replaced soon!
– The batteries are dead. Replace the
batteries!
- Overload! The material in the spoon 1 is
heavier than the maximum allowed weight!
Remove some material from the spoon 1!
Cleaning and care
ATTENTION! PROPERTY DAMAGE!
Do not use abrasive or chemical cleaning
materials. These will damage the surface of the
appliance!
♦ Clean the appliance with a damp cloth. For
stubborn soiling use a mild detergent on the
cloth.
NOTE
You can remove the spoon 1 from the
spoon handle and clean it separately in
the dishwasher.
♦ Ensure that the appliance is properly dry before
re-using it.

Silvercrest SDL 300 C2 Specifications

General

Brand	Silvercrest
Model	SDL 300 C2
Category	Scales
Language	English